case
case
The bottom valve is installed at the lowest end of the pump suction pipe to prevent the water in the suction pipe from being drained after shutdown.
The three-way ball valve is a commonly used valve. Its main function is to control the flow direction of the fluid medium in the pipeline. This valve has the advantages of simple structure, convenient operation, and good sealing performance, and is widely used in various industrial pipeline systems.
Do not install the gate upside down (that is, with the handwheel downward), otherwise the medium will remain in the valve cover space for a long time, which will easily corrode the valve stem, and is contraindicated by certain process requirements. It is extremely inconvenient to replace the packing at the same time. Do not install rising stem gate valves underground, otherwise the exposed stem will be corroded by moisture.
The customer said: He is very satisfied with wesdom group’s attentive and meticulous service and product quality. If there is demand for products in the future, he will continue to cooperate with wesdom.
The sealing ring refers to an annular cover composed of one or several parts. It is fixed on one ring or washer of the bearing and contacts another ring or washer or forms a narrow labyrinth gap to prevent lubricating oil from leaking out and foreign objects from intruding. Because its cross-section is O-shaped, it is called an O-shaped sealing ring.
Reliable and durable, WESDOM’s products are your purpose; WESDOM not only provides products, but also provides one-stop service.
A factory in Southeast Asia purchases WESDOM valves, pneumatic butterfly valves, flanged stainless steel ball valves, and swing check valves.
Reliable and durable, WESDOM’s products are your purpose; WESDOM not only provides products, but also provides one-stop service.
When the valve plate is fully open, the top of the valve plate is in contact with the valve cover. Without stopping the water, the bolts, valve cover and nuts can be disassembled for seal replacement and repair.
Use the hand wheel when opening and closing the pneumatic butterfly valve. Do not use levers or other tools to avoid damaging the valve parts.