case
case
The control valve should generally be installed upright, and should be supported if it needs to be tilted.
WESDOM has been receiving attention from all over the world,Trust comes from quality.
Specification for the installation and use of metal gasket In…
Installation and maintenance of 100X Remote control ball float valve…
The butterfly plate must be in the closed position during installation to ensure that the butterfly plate does not collide with the pipe flange.
Gate valve installation to clean the inner cavity and sealing surface, do not allow dirt attachment.
Confirm whether there are impurities, welding slag and so on in the pipeline, the pipeline must be swept clean.
Maintenance of pressure reducing valve,The piping and guide valves of the pressure reducing valve shall not be collided during installation.
How to install and maintain joints? Installation and maintenance of telescopic…
The sensor must not be installed at the inlet and outlet of the pump and should be installed at the outlet of the pump.